You may need a few items such as lopping shears, pruners, a pruning saw, a ladder, and a rake.

When you prune, take off the dead branches of the plant. Not sure which ones are dead? Snip off a little bit, if the branch is brown on the inside, it’s most likely dead. Snip a little at a time toward the middle of the plant until the middle of the cut is green.

Inspect your trees and shrubs for branches that are “criss-crossed” or that rub other branches. Take off one of “criss-crossed” branches. Be safe and do not try to cut branches that may be too large for you to handle or that are over head. Once cut, these branches may fall and strike you. Leave this type of pruning to a professional.

Snip off the suckers that are coming out of the ground or that are growing perpendicular or straight out of the plant. Crab trees often have both of these types of suckering growth, as do many maples.

Trim off any broken branches within the plant and discard. Again, cut those branches that you can safely cut.

After removing any diseased or dead branches, you should clean your tools with a bleach or an alcohol solution to disinfect them so that, if diseased, the disease is not spread to other branches or plants.

Now is a great time to re-shape the plants – just remember to trim a little at a time, step back and take a look at it – because once you cut it off, you can’t put it back on. Dogwoods and especially Spirea benefit from this.

Dormant pruning is one of the best things you can do for your plants. If it’s your first time, it may be a little intimidating, but know this: most plants are pretty hardy – you may over-trim, but sooner or later, it will grow back, just be patient and take your time.

The cold, snowy winter a lot of forecasters were predicting still hasn’t hit us. Personally, I’m a little disappointed. A lot of snow means a lot of plowing for me; cold weather usually means a lot of firewood sales. However, I know I shouldn’t complain. We’re still making firewood sales, and sooner or later, it’s gotta snow – right?

This past year has taught me to appreciate everything (from the big things to the little things), to be thankful for what I have in my life, not to dwell on the things that are gone or the things I never possessed, and to know that with each new day comes new hope. It’s also taught me that having good health is truly a blessing and that loving family and friends and faith are really the most important things in life.

So, while no one’s life is perfect and some may feel that there’s not much good in it, take a couple of minutes before the new year starts and think of the blessings you do have in your life and then think of ways you can build on them in the coming year.

Here’s wishing you all a Happy, Healthy and Prosperous New Year!!!!

Last week, I mentioned that I would post a “how to” blog regarding the installation of a fire pit. Well, here it is:

The first thing I would suggest doing is to contact your village/town offices regarding permit and placement regulations. I know some villages have certain requirements regarding the placement of a stationary fire pit, better to check it out before you start.

Next, decide where you want the fire pit to be installed. For size, I like to build mine with a 42” inside diameter and usually 4 courses tall. To ensure a nice circle, you may want to place a stake and run a 21” string around. You may want to mark this area with marking paint.

After you mark your area, decide whether you want a 3 or 4 tiered fire pit. Remember that 1 tier (or layer of stone) will be buried.

Order a “fire pit kit” from A.G. Landscape Materials, Inc. The kit will contain Grade 8 Gravel to be used as the base for the stone, the Unilock Stack Stone (your choice of color Nevada or Sierra), 1” – 1.5” Washed Gravel and Adhesive. You may want to order 30 – 60 pieces of firewood, too. That way you’re ready to burn. You can order your kit and firewood by calling us at (630) 295-8190 or e-mail us at agvangundy@hotmail.com

I highly recommend that you call JULIE (1-800-892-0123) to have them locate and mark your underground utilities. They’ll need 2 business days to completely mark the area.
Ensure you have all the tools you need. I would recommend a shovel, wheelbarrow, tamper, 1 stake, string, 1’ level and a rubber/wood mallet.

Now you’re ready to start construction:

Excavate the area to accommodate the Grade 8 gravel and the depth of one (1) Stack Stone. For a 42” inside diameter, the total circle will need to be approx. 60”. You will need to dig a depth of 8” – 10”.

Install Grade 8 Gravel where the Stack Stone will be installed. Make sure you tamp the gravel at approx. every 2”. You will need an approx. depth of 4” – 6”.

Install the Stack Stone. The 1st course should be below ground level. The 2nd, 3rd, and 4th (if applicable) courses should be glued to the course beneath it.

Install 1” – 1.5” Washed Stone. This will assist with water drainage out of your pit. The depth should be at approx. 5” – 6”.

As an option, you can purchase a firewood grate from a home improvement store and install that within your pit.

Once your adhesives dry, usually within a day or so, you’re ready to burn.

If you have any questions, please don’t hesitate to contact us at (630) 295-8190 or e-mail any questions to agvangundy@hotmail.com

Finally, how about that game on Sunday night? Personally, I couldn’t have enjoyed it more; my daughter came in from Minnesota and went with us. What a great day it was!!!
Hopefully, this Sunday will prove to be just as great of a day. We’ll keep our fingers crossed and the fire burning!

If you are thinking about a larger job which will require a building permit from your town or village and want it to be completed early enough for you to enjoy most of the year, we will have plenty of time now to complete the design and make any needed adjustments before filing for the permit. Most towns and villages now require permits for patios, retaining walls, driveways, and in some cases even drain tile work. In addition to expanding their permit requirements, many of villages have reduced their building department staff, which has increased the amount of time needed for getting a permit approved. The permit approval process, which previously was a simple 2 – 3 day process has now become a 2 – 3 week process in some villages that are requiring more and more specifications. Some towns are now even requiring engineering prints and seals for retaining walls over 24” – 30” high. I’m not telling you of these new requirements to scare you off of doing your project; I just want to inform you of what some of you may be up against. We here at A.G. VanGundy Landscape, Inc. have worked with a majority of the towns/villages here in the Chicago area and I have to admit, we have a pretty good working relationship with most of those building departments. We understand that they have limitations, as do most of us, and are willing and able to work with them and act as your liaison to get your permit approved. But, why not start this process as early as possible? The longer you wait on this, the longer the permit process will probably take.

I’m sure plenty of you are thinking about changing some things in your current landscape, but aren’t quite sure what to do. Where do you get “the most bang for your buck”? For ideas, there are plenty of publications and t.v. shows, but I think a great way to get ideas and/or meet contractors early in the season is to attend one of the week-end home improvement shows that occur just about every week-end somewhere in the Chicago area. Currently we are scheduled to be at two local home shows within the next few months. On February 25 – 27, 2011 we will be at the Home show in Arlington Heights and on March 12 & 13, 2011, will be at the home show in Palatine at Harper College. This is a great opportunity for people to come out and talk to us personally about you’re wants and needs for landscaping, look through our portfolios of before and after shots and of some of our completed projects. This also give you an opportunity to set up a free first appointment (with some restrictions) right then. We love taking part in these home shows as it gives us an opportunity to “show our stuff” to potential clients in the area.

For more information regarding planning for spring, check out our previous blogs from January, 2010, I think you’ll find them informative.

For more information regarding A.G. VanGundy Landscape, Inc., please visit us at www.agvangundy.com or call us at (630) 295-8190. We’ll be more than happy to go over the areas we service and the services that we offer.

Some of our most popular blogs have been about Topsoil, Firewood, and Planning for Spring. Other blogs have been about Permit Processes, Sales Processes, Lawn Renovation, Snow Plowing, and Mulching, just to name a few.

Today I just wanted to let you know about some blogs that I’ll be posting in the future:

Cleaning & Sealing of your brick pavers
Polymeric Sand vs. Fine Sand
Building your own retreat space
Permits & the many new regulations for a lot of the villages in the Chicagoland area

I’m looking forward to continuing posting blogs.

If you have a topic or subject you’d like me to discuss regarding landscaping or landscape materials, please don’t hesitate to submit it to me via my web site at www.agvangundy.com.

Planting your bulbs should be done now. Bulbs are a great way to add early color to your landscape and, depending on type of bulb and depth of planting, will keep the color coming throughout the growing season. A little planning and research will ensure your success. Probably the first thing you should know is what zone you live in. Here in the Chicago area, we are in zone 5. Zones 4 & 3 are to our north and 6 – 10 are to our south. Knowing what zone you’re in will help determine the best bulbs for your area and the bloom time.

There are a wide variety of options when it comes to selecting which bulbs to plant. These are a few of the things you should consider before purchasing/planting your bulbs:
1. Color Scheme
2. Area (Is it sunny? Is it shady? Is it a combination?)
3. Bloom Time
4. Height of the Plant
Once your decisions are made, head to your local supply store and purchase your bulbs.

To plant your bulbs, prepare the area by tilling the soil so that it is easier to plant in. Mixing a little compost with the soil will help soften the soil and add additional nutrients (check out our blog dated 4/28/10 on different types of soils).

Many people choose to use a drill with a “tulip” bit to assist them in digging individual holes for the bulbs. Others choose to dig a “trench like” area to place the bulbs in at once; still others choose to dig individual holes with a tulip spade or even dig by hand. The depth of the hole or holes is usually listed on the bag or container that the bulbs came in. Also, usually listed, is the recommended distance between each bulb.

Place the bulb in the hole(s) root side down and cover with topsoil. Moisten the soil and tamp lightly.

That’s all there is to it. Now just wait for early spring for the first of the bulbs to emerge.

Fall Clean Ups should also be done between now and the end of November. A good fall clean-up should consist of at least removing and disposing of fallen leaves and other debris collected in planting beds and in your lawn area. Here at A.G. VanGundy Landscape, Inc. we would also recommend a core-aeration and installation of a layer of mulch. The core aeration will help loosen the soil and make it easier to accept the fall application of fertilizer. If you are going to put down any herbicide or weed killer, do not overseed at this time as the seed will not germinate properly. The installation of mulch is a good idea as it will help retain moisture and root zone temperature in your planting beds over the winter months.

Finally, with your outdoors ready for winter – make sure you’re stocked with ready to burn firewood from A.G. Landscape Materials. There are several different types of firewood; however we sell Oak and Mixed. We sell by the Face Cord, ½ Face Cord, 60 pieces & 30 pieces. We deliver to your home (in the Chicago Area) and stacking services are also available.

Check out our website @ www.agvangundy.com for more information regarding firewood or any other products & services we offer.

Speaking of wet weather, it’s sometimes a challenge to get things to grow. I do have some suggestions for you. Certain trees do really well in wet areas and are a great way to add to your landscape and help the environment. Fall is a great time to plant trees and now is an excellent time to start planning. I have listed a few of my favorites that I think might be worth your consideration when thinking about adding to your landscape. I have also noted the trees that do well in wet, poorly drained soil.

Arborvitae (Evergreen)
Emerald Green – Foliage is emerald green and it grows in a narrow, pyramidal
form. It grows to be approx. 20’ X 4’. Tolerates moist soils

Mission (Techny) – Foliage is a dark green and it grows in a broad, pyramidal
form. It grows to be approx. 12’ X 6’.

Nigra – Foliage is dark Green and it grows in a pyramidal form.
Appox. 12’ X 3-6’.

Birch (Deciduous)
River – Pyramidal & Oval in shape. Multi-Stemmed. Light Green Foliage in
summer. Yellow/Gold foliage in fall. Exfoliated tan/white bark.
Approx. 45’ – 30’. Tolerates wet/moist soils.

Whitespire – Pyramidal in shape. Multi-Stemmed. Dark Green foliage in
summer. Yellow foliage in fall. White Bark. Approx. 35’ X 25’.

Hawthorne (Deciduous)
Thornless Cockspur – Glossy, deep green foliage in summer. Orange/scarlet
foliage in fall. White flowers in spring followed by red fruit.
Approx. 20’ – 30’ X 20’-35’.

Maple (Deciduous)
Autumn Blaze – Bright Orange/Red fall foliage. Oval/Rounded growth habit.
Approx. 50’ X 40’. Tolerates moist soils.

Marmo – Orange/Red fall foliage. More of an upright oval growth habit.
Appox. 70’ X 40’. Tolerates moist soils.

Red Sunset – Glossy Dark Green foliage in summer. Brilliant Red/Orange fall
foliage. Upright/oval growth habit. Approx. 50’ X 40’. Tolerates moist
soils.

Superform Norway – Green foliage in summer. Yellow foliage in fall.
Upright/round growth habit. Approx. 45’ X 40’.

Pear (Non-Fruit Bearing) (Deciduous)
Chanticleer – Glossy green foliage in summer. Red/Orange to Purplish in fall.
White flowers in spring. Approx. 30’ X 15’. Tolerates moist soils.

Serviceberry (Deciduous)
Autumn Brilliance – White flowers in spring. Purple fruit. Yellow to Bright
Red fall color. Available in Tree form or Shrub (Multi-Stem Form).

Spruce (Evergreen)
Black Hills – Pyramidal Shaped with short Blue/Green foliage.
Approx. 30’ – 40’ X 25’.

Colorado Blue – Narrow-Broad pyramidal growth. Blue, prickly needles.
Approx. 30’ – 60’ X 20’.

Colorado Green – Narrow-Broad pyramidal growth. Green, prickly needles.
Approx. 30’ – 60’ X 20’.

Remember when planting a tree to dig the hole about 1.5 times the size of the root ball width and 1” – 2” shallow so that the ball of the tree creates a slight crown. When placing the tree in the hole, just set it in, larger trees may have to be rolled in. When rolling, take care not to loosen the root ball. Once it’s in the hole, stand back and take a look at it. Is it positioned the way you want it? If not, turn it until it is. Now is the time to take this step. If the root ball, has twine or string around it, cut it or loosen the string. It’s a good idea to back fill the hole with a topsoil/compost mix either by purchasing new topsoil and compost mixed or just adding compost to your existing soil or garden mix, all of which is available at A.G. Landscape Materials, Inc. A lot of people will come in to buy a 30 gallon container of it when they have planted 1 tree. You may want to consider sprinkling a little starter fertilizer around the tree at this point. Once the hole is back-filled, be sure to water the tree as it has been through a lot. Next, I would recommend placing approx. 2” of Premium Hardwood Bark Mulch around the tree. The mulch will help retain moisture and will help control the root zone temperature. An added benefit of installing the mulch is that it will break down over time and create an almost compost-like soil around your tree which will aid in getting nutrition to the tree. Finally, cut off the tags, sit back and watch it grow.

If you need more information or would like a quote from A.G. VanGundy Landscape, Inc. please contact us at www.agvangundy.com or call us at (630) 295-8190.

Reference Material used: N.C. State University
Wilson Nursery
Dirr, Michael, J; Manual of Woody Landscape Plants: Their Identification, Ornamental Characteristics, Culture, Propagation and Uses

To prepare for planting the Annuals, I suggest tilling in an inch or two of compost into the planting bed to create a planting soil depth a minimum of about 4 inches. If the existing topsoil in your planting area is a very thin layer, then be careful not to till the compost in too deep as you don’t want to mix in or bring up the clay soil just beneath the topsoil. A good idea, if you have little topsoil and if time allows, is to scrape any available topsoil off and remove some of the clay soil and add a good Garden Mix to the bed and then till in your topsoil. Here at A.G. Landscape Materials, we sell a pre-mixed (at the pulverizer) Garden Mix which consists of 1 part Topsoil, 1 part Compost, 1 part Torpedo Sand. In our experience this combination has worked really well; however there are many different schools of thought as to just the right combination, all of which have there good points. So, we also have the capability of customizing the mix that you believe will work for you. As a matter of fact, we just delivered to one of the local Minor League Baseball teams in the Chicago area a mix that they felt would work for them.

I wish you good luck with your Annuals and hope you have a colorful spring!!

When trying to fill a deep void (over 10”) i.e. a swimming pool or larger build ups, fill dirt may be used. The “fill dirt” from A.G. Landscape Materials is a product developed from the removals of soil, sod, and land from our customers’ projects. There can be almost anything in it (including, but not limited to, soil, clay, decomposed sod, and some stone), but it is predominately soil. This material usually needs a top covering of pulverized topsoil to first be able to smooth out the top layer and then to have something better to grow into. A real plus for using fill dirt in these applications is that it is inexpensive and a heavier soil. The drawbacks are that it can be difficult with machinery to place and work with.

Rough vs. Pulverized Topsoil: First off, we at A.G. Landscape Materials, Inc. do not carry rough or un-pulverized topsoil. We can have it direct shipped, but like fill dirt you may need a machine or Bobcat to spread it. We prefer to sell pulverized topsoil. Pulverized topsoil is mainly a soil that is removed from farm fields and brought by truck to our location and then reloaded on trucks and sent to homes throughout the Chicago- land area. I discussed “What is Topsoil?” in a blog back on April 1st, 2010. Pulverized topsoil is relatively easy to work with and rake out since most particles are less than ¾” to 1” at most. It is also easy to plant grass seed or other plants into and can be used in either deep applications or thin applications. A con to topsoil may be that the particles can “melt” together and in deeper applications settling may occur if it was not compacted.

Garden Mix is a blend of pulverized topsoil, compost and sand. It is best to use when establishing a new garden or when adding to a garden. I have seen people use this material for lawn seeding application due to its finer granulars, drainage capabilities and being more fertile due to its compost. Although it costs more, since it is premixed, it simplifies the process. You can also plant right into it.

The compost sold at A.G. Landscape Materials, Inc. is developed from a mix of organic materials and turned over and over until it becomes compost. It does not contain manure, and I feel it is easier to work with. It is best when tilled into the soil and can be used with new or existing gardens and flower beds. It also helps loosen clayish soils. Ground covers love this product. I suggest compost on most of our landscape planting projects. A con to this product is that it is light and thus has no weight carrying capabilities and may be more susceptible to wash out in extreme conditions. You should also not plant directly into only compost. It can dry out faster and the solidity of topsoil is helpful.

Most of these materials have other uses than those we discussed here. For your needs, you can e-mail or call us at (630) 295-8190 and we’ll be happy to assist you and hopefully get the right material to you so you can do your job right.

There is much to say about fertilizers and herbicides. Since the time I started A.G. VanGundy Landscape, Inc. nearly 30 years ago, my opinion on fertilizers and herbicides has swayed back and forth many times. For about the past 10-12 years though, I feel that the use of chemicals in the landscape is greatly overdone and the marketing of these chemicals and the companies that spread them has created a sense that if you don’t have 5 or 6 applications of chemicals a year, you won’t have a great lawn. In my opinion, for most lawns, you should not need more than 3 applications per year. These applications would be: a good balanced fertilizer in March or April, a fertilizer with herbicide that kills weeds by contact in May, and a late summer/early fall treatment. More applications than that, I feel, causes additional fertilizer and chemicals to “run off” and end up in our streams and rivers. I believe in using balanced fertilizer with a good over-seeding program that promotes root development. Without getting into specifics, usually there are three (3) numbers on a bag of fertilizer (like 12-12-12 or 28-6-6). A high first number (over 20 for example) usually promotes a faster growth rate and some “greening”. I feel that it is just as important to develop root growth and that a fully healthy plant will, in time, look just as great and most likely use less water as well. This means that the first treatment for most lawns that are basically healthy should be a 12-12-12 or 14-14-14. A slow release type is best, if the weather stays cool in early spring.

I often over-seed during the middle or end of April, so I do not use a fertilizer with pre-emergent or regular herbicides. I only use these chemicals in a weedy situation or if there is bountiful crabgrass. As we get into May, and the Dandelions and other weeds begin to show in earnest, I then use a fertilizer with herbicide added.

Most commercial solid/granular herbicide based fertilizers must be drop-spread onto a “wetted” or “dewy” lawn so that the herbicide sticks to the leaves of the weed and can be absorbed into the plant. Please note to make sure that you read the recommended spreading rates for your application on the bag and do not exceed their recommendations, as this may cause a chemical burn to your lawn. If your lawn has a severe weed problem, using a solid fertilizer again and spraying a liquid weed killer may be the best option for you. Many liquids come in a bottle ready to attach to a hose and spray across the lawn. Please refrain from spraying on windy days, as this may force the chemicals to “over-spray” onto any ornamental plants that you or your neighbors may have adjacent to the lawn.

Finally, in late summer or early fall apply a balanced fertilizer similar to 12-12-12. This strengthens the lawn to go into the winter season. I do not recommend a super late application. I feel that this just runs off and that little benefit, if any, comes from it since I highly suggest a late March/early April fertilizer application.

For most applications this program should work. It does for my own home. When I do get that stray weed or two, I spray them singularly with a hand held or pump sprayer instead of a “blanket” spreading. I believe that this is easier on the environment.

Following these simple and easy steps should lead you to a good lawn. Sometimes though, thru negligent or otherwise, a complete removal and reinstallation of sod or new seeding may be required. This can be a large task to undertake and you may want to call a company, like A.G. VanGundy Landscape, Inc. or A.G. Landscape Materials, Inc. for guidance and/or assistance with material selection. Many times, I feel that sodding is faster and easier in the long run. The “speed” can be a big benefit if you have dogs or children as it usually only requires watering to get it established. However, a complete regrade is usually required along with the removal and disposal of the existing lawn/turf. Sodding’s largest con is that the up front costs can be higher than seeding and in high shade areas may have only temporary success. Overall, though these costs are overcome in less time and re-work or touch ups in seed starting.

For those of you considering seed and have the 20-35 days to establish a lawn, the seed benefits are a lower initial cost, less hard labor to install and the seeded lawn conforms to the area planted. Generally, I feel that seed lawns initially use less water, but that increases over time to equal with the sod.

Both seeding and sodding require the same prep work with the exception that when sodding, the grade must be an inch lower at concrete sidewalks and driveways to allow for the thickness of the sod. We, at A.G. VanGundy Landscape, Inc. and A.G. Landscape Materials, Inc., believe in using an erosion control blanket or straw blanket stapled over the seed bed for sun protection and water/moisture retention. In my opinion, hay should not be used, as hay may contain weed seed and could contaminate the new lawn. We sell the blankets, staples, and grass seed and also the sod here at our yard in Roselle.

Most of the directions given here are for work in the Chicagoland area. If you are one of our readers that live in another growing area, check with your county or state horticulture extension service for information for your area.

Finally, there are many opinions out there on how to achieve a great lawn. For the most part, patience and determining a plan or course of action and then sticking to it should be your best remedy.